Home Anchors Large Diameter Tapcon® Anchor 1/2 x 3"
Anchors
DV_ZoomOriginal_P_30848_WB.jpg
DV_ZoomOriginal_P_30848_LD1.jpg
DV_ZoomOriginal_P_30848_WB.jpg
DV_ZoomOriginal_P_30848_LD1.jpg

Large Diameter Tapcon® Anchor, Carbon Steel, Zinc Finish, 1/2 x 3"
(Pack of 10)

Item#: 26768

Lawson Products

• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection

Read More
Check Availability

Catalog page#: 6-43

Frequently Bought Together

DV_ZoomOriginal_P_625.jpg

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"

Item#: 25141
DV_ZoomOriginal_P_625.jpg

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

Item#: 25145
DV_ZoomOriginal_P_41501_WB.jpg

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"

Item#: 91618
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 3/8-16

Item#: A102
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13

Item#: 53983
DV_ZoomOriginal_I_88441.jpg

SAE Flat Washer Thru-Hardened Steel 5/8"

Item#: 88441
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 3-1/4"

Item#: 96917
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1"

Item#: 64751
DV_ZoomOriginal_P_41605.jpg

Masonry Anchor TORX® Flat Head Steel 1/4 x 1-3/4"

Item#: 96928
DV_ZoomOriginal_I_92822_WB.jpg

Butt Connector 22 to 18 AWG Red

Item#: 92822
DV_ZoomOriginal_I_88437.jpg

SAE Flat Washer Thru-Hardened Steel 3/8"

Item#: 88437
DV_ZoomOriginal_I_DA6152.jpg

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Item#: DA6152

Product Description

• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection

Technical Specifications

Item#: 26768
Diameter 1/2 "
Length 3 "
Type Screw Anchor
Drill Size 7/16 "
UNSPSC #: 31162104
TAA Compliant: Yes
Weight: 1.98 lb

Suggested Products

Your Recently Viewed Items