Large Diameter Tapcon® Anchor, Carbon Steel, Zinc Finish, 3/8 x 2-1/2"
(Pack of
10)
High performance, high production, self-threading anchor
Carbon steel with zinc plating
Removable
Low slippage
High shear strength
Finished head
Vibration-resistant
Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-43
Frequently Bought Together
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"
Couldn't load pickup availability
Wing Type Toggle Bolt Steel #10-24 x 3"
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
3/16X1-1/4 Chrome Ez-One Phillips Ovl Hd
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 4"
Couldn't load pickup availability
3/16X1-1/4 Chrome Ez-One Phillips Pan Hd
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Product Description
High performance, high production, self-threading anchor Carbon steel with zinc plating
Removable
Low slippage
High shear strength
Finished head
Vibration-resistant
Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
| Item#: | 61666 |
|---|---|
| Diameter | 3/8 " |
| Length | 2-1/2 " |
| Type | Screw Anchor |
| Drill Size | 5/16 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.83 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
