Modular Plug-In Connector, Nylon Body, 5/32" (4mm), Tube
(Pack of
1)
SKU:1199386 Item#: 1199386
The modular construction of this component allows a number of pneumatic tubes to be connected or separated with a simple plug-in action.A series of male/female connectors provide a leakproof joint. Units of any length can be constructed.The two common uses for this product are:1. Fixing one half to a panel, machine or bulkhead and allowing the floating half to be assembled or disconnected to change a machine or sequence. Often when machines are transported air lines are separated and this connection provides a foolproof method of reconnection on site. 2. Using the connector in an in-line mode for joining long lengths of pipe-work which need to be disconnected periodically. It is advisable to limit the unit length to five connectors.Personalization of ConnectorBy reversing the slices of the module during their assembly it is possible to ”offset“ units so that they cannot be mixed or inadvertently connected in the wrong order.
Components Used In The Module Assembly The module is constructed from a number of symmetrical components that are designed to work together. When fully assembled, one box of the modular plug-in connector provides twenty, 4mm tube onnections (ten in one half and ten mating ones in the other).The complete box contains:- 10 units each- 20 joining pins and 4 end pins- 4 mounting brackets- 4 coupling clips- 1 dismantling tool
CAUTION: These fitting systems are not D.O.T. approved. Do not use for air brake connections.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Push-to-Connect Elbow, Nickel-Plated Brass/PBT Resin, 1/4 x 1/4"
Couldn't load pickup availability
Pipe Street Elbow Brass 45° 1/8-27 x 1/8-27
Couldn't load pickup availability
Pipe Nipple Brass 1/4-18 x 1/4-18
Couldn't load pickup availability
Pipe Coupling Brass 1/4-18 x 1/4-18
Couldn't load pickup availability
Pipe Coupling Brass 1/2-14 x 1/2-14
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
Push-to-Connect Union Elbow, Nickel-Plated Brass/PBT Resin, 1/4 x 1/4"
Couldn't load pickup availability
Push-to-Connect Elbow, Nickel-Plated Brass/PBT Resin, 5/32" x M5
Couldn't load pickup availability
Push-to-Connect Connector, Nickel-Plated Brass/PBT Resin, 5/16 x 1/4"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
Couldn't load pickup availability
Product Description
The modular construction of this component allows a number of pneumatic tubes to be connected or separated with a simple plug-in action.A series of male/female connectors provide a leakproof joint. Units of any length can be constructed.The two common uses for this product are:1. Fixing one half to a panel, machine or bulkhead and allowing the floating half to be assembled or disconnected to change a machine or sequence. Often when machines are transported air lines are separated and this connection provides a foolproof method of reconnection on site. 2. Using the connector in an in-line mode for joining long lengths of pipe-work which need to be disconnected periodically. It is advisable to limit the unit length to five connectors.Personalization of ConnectorBy reversing the slices of the module during their assembly it is possible to ”offset“ units so that they cannot be mixed or inadvertently connected in the wrong order.Components Used In The Module Assembly The module is constructed from a number of symmetrical components that are designed to work together. When fully assembled, one box of the modular plug-in connector provides twenty, 4mm tube onnections (ten in one half and ten mating ones in the other).The complete box contains:- 10 units each- 20 joining pins and 4 end pins- 4 mounting brackets- 4 coupling clips- 1 dismantling tool
CAUTION: These fitting systems are not D.O.T. approved. Do not use for air brake connections.
Technical Specifications
| Item#: | 1199386 |
|---|---|
| Manufacturer Model #: | 3300 04 00 |
| Style | Modular Plug-In Connector |
| Tube Size | 5/32" (4mm) |
| Material | Nylon Body |
| UNSPSC #: | 40183100 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
