Nylon Insert Flange Nut Grade 8 3/4-10
(Pack of
5.0)
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness
• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Grade G for use with Grade 8
• Solves the problem of an oversized hole and eliminates the need for a washer
• Non-serrated flange will not mar the surface
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog Page#: 3-28
Frequently Bought Together
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 1/2-13 x 1-1/2"
Couldn't load pickup availability
Flange Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Locknut with Nylon Insert 18-8 SS #10-32
Couldn't load pickup availability
Locknut with Nylon Insert 18-8 SS #6-32
Couldn't load pickup availability
Hex Nut Grade 10 Alloy Steel M10-1.5
Couldn't load pickup availability
Locknut with Nylon Insert Grade A 5/16-18
Couldn't load pickup availability
Hex Nut Machine Screw Grade 2 Steel #10-32
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1-1/2"
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 1/4-20 x 1"
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Product Description
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Grade G for use with Grade 8
• Solves the problem of an oversized hole and eliminates the need for a washer
• Non-serrated flange will not mar the surface
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Technical Specifications
| Item#: | 18250 |
|---|---|
| Diameter | 3/4 " |
| Thread Pitch | 10 |
| Grade | 8 |
| Finish | Bright Zinc |
| Type | Flange Nuts |
| Material | Alloy Steel |
| Thickness | 0.825 " |
| Across Flats | 1-1/4 " |
| Thread | Coarse |
| Specifications | IFI 100/107 |
| Flange Diameter | 1.585 " |
| UNSPSC #: | 31161712 |
| TAA Compliant: | No |
| Weight: | 0.8 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
