Security Anchor, Reversible Head, Steel, Zinc Finish, 5/16 x 2-3/4"
(Pack of 10)

Lawson Products

• Resistant to tampering and vibration
• Reversible nut for round head or flat head style
• Carbon steel anchor body and nut with hardened setting pin
• High pull-out and shear strength
• Made in USA
• For use in all poured concrete and brick materials
• Applications: Security door frames, motion detectors, lock boxes, money meters, fencing, vending machines, burglar bars, benches, light fixtures, playground equipment, cash machines, stadium seating, mailboxes, prison furniture
1. Drill hole of sufficient depth, using same diameter bit as anchor being installed.
2. Select head style (round or flat), then turn security nut flush with the top of anchor. Insert anchor into pre-drilled hole.
3. Drive in setting pin with hammer until flush. Use a 2 to 3 lb. hammer for small anchors and a 4 to 5 lb. hammer for medium and large anchors.
4. Slotted anchor base expands into concrete. Anchor is now properly set.

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 6-25

Frequently Bought Together

Conical Screw Anchor Kit Plastic 301Pcs

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

Pin Drive Expansion Anchor Steel 5/8 x 6"

Pin Drive Expansion Anchor Steel 3/8 x 2-3/8"

Lag Screw Shield Anchor Long Style 1/2 x 3"

USS Flat Washer Thru-Hardened Steel 1/4"

SAE Flat Washer Thru-Hardened Steel 1/4"

Hex Nut Grade 8 Alloy Steel 3/8-16

USS Flat Washer Thru-Hardened Steel 3/8"

Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece

Item#: DY89320050

Nylon Cable Tie 4" Black

Product Description

• Resistant to tampering and vibration
• Reversible nut for round head or flat head style
• Carbon steel anchor body and nut with hardened setting pin
• High pull-out and shear strength
• Made in USA
• For use in all poured concrete and brick materials
• Applications: Security door frames, motion detectors, lock boxes, money meters, fencing, vending machines, burglar bars, benches, light fixtures, playground equipment, cash machines, stadium seating, mailboxes, prison furniture
1. Drill hole of sufficient depth, using same diameter bit as anchor being installed.
2. Select head style (round or flat), then turn security nut flush with the top of anchor. Insert anchor into pre-drilled hole.
3. Drive in setting pin with hammer until flush. Use a 2 to 3 lb. hammer for small anchors and a 4 to 5 lb. hammer for medium and large anchors.
4. Slotted anchor base expands into concrete. Anchor is now properly set.

Technical Specifications

Item#:	59627
Anchor Size	5/16 "
Length	2-3/4 "
Type	Security Anchor
Material	Carbon Steel
Finish	Zinc
Size	5/16X2-3/4 "
UNSPSC #:	31162101
TAA Compliant:	Yes
Weight:	0.66 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Self-Drilling Wall Anchor 1-5/8"

Conical Screw Anchor Plastic #10 to #12 x 1"

Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"

SNAPTOGGLE® Toggle Bolt Anchor 1/4-20

Conical Screw Anchor Plastic #14 to #16 x 1-3/8"

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"

Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"

Conical Screw Anchor Plastic #8 to #10 x 7/8"

Conical Screw Anchor Kit Plastic 301Pcs

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

Your Recently Viewed Items