Throttle Ball Joint with Spherical Bearing, UNF Threads, Plated, Right Hand Threads, 5/16-24 Male Rod End with Stud
(Pack of
1)
• Available in both right and left hand threads (studs are right hand threads)
• Principles of design incorporate high-angle misalignment, oscillation and shock resistance with all tolerances controlled
• New bronze race helps assure reduced frictional wear for longer life
• Will not stiffen when subjected to cold
• Allows a 50° misalignment in any direction
• UNF threads
• Plated
• Low carbon steel housing
• Male and female threads are the same size
• Low carbon, case-hardened steel balls
• Recommended for all but extremely high load applications
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 22-26
Frequently Bought Together
MCN Series Lead Clip-On Wheel Weight 1 oz
Couldn't load pickup availability
MCN Series Lead Clip-On Wheel Weight 1/4 oz
Couldn't load pickup availability
Dual Foot Tilt-Lock Air Chuck
Couldn't load pickup availability
Front and Rear Bumper Fascia Retainer Plastic 1"
Couldn't load pickup availability
Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability
Bumper Cover and Fender Shield Push-Type Retainer
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 5/8-18
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 3/4-16
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 5/8-18
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 7/16-20
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 7/16-20
Couldn't load pickup availability
Throttle Ball Joint with Spherical Bearing 3/8-24
Couldn't load pickup availability
Product Description
• Available in both right and left hand threads (studs are right hand threads)• Principles of design incorporate high-angle misalignment, oscillation and shock resistance with all tolerances controlled
• New bronze race helps assure reduced frictional wear for longer life
• Will not stiffen when subjected to cold
• Allows a 50° misalignment in any direction
• UNF threads
• Plated
• Low carbon steel housing
• Male and female threads are the same size
• Low carbon, case-hardened steel balls
• Recommended for all but extremely high load applications
Technical Specifications
| Item#: | 59564 |
|---|---|
| Length of Rod End to Center of Stud | 1.875 " |
| Stud Length | .687 " |
| Stud Length to Center of Rod End | 1.234 " |
| Male and Stud Threads | 5/16-24 |
| Static Load Rating | 1,050 lb |
| Stud Thread | 5/16-24 " |
| Thread | Right Hand Threads |
| Plating | Yes |
| A | .687 " |
| B | 1.234 " |
| C | 1.875 " |
| UNSPSC #: | 25172405 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
