Turnbuckle, Eye and Eye, Galvanized, 3/4" x 12"
(Pack of
1)
SKU:1442464 Item#: 1442464
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together
Spring Link, 5/16", 350 lb WLL, Zinc
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/8", 3,000 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/4", 9,500 lb WLL
Couldn't load pickup availability
Tuff-Edge® Web Sling, Polyester, Silver, 4' Length
Couldn't load pickup availability
Tuff-Edge® Web Sling, Polyester, Silver, 6' Length
Couldn't load pickup availability
Screw Pin Anchor Shackle, 1/4", 1,500 lb WLL
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442464 |
|---|---|
| Manufacturer Model #: | 01304 8 |
| Type | Eye and Eye |
| Diameter | 3/4 " |
| Closed Length | 21-3/4 " |
| Working Load Limit | 5,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
