Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
(Pack of
1.0)
Turnbuckles can be used to apply tension to wire rope or cable
Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class D
Apply load to the center of end attachment eyes do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together

Hook Ceiling Trade Size 10
Couldn't load pickup availability

Screw Pin Anchor Shackle, 5/8", 6,500 lb WLL
Couldn't load pickup availability

Hook Ceiling Trade Size 8
Couldn't load pickup availability

Grade 43 Clevis Slip Hook with Latch, 1/4", 2,600 lb WLL
Couldn't load pickup availability

Tarp Strap Epdm Rubber with Hooks 35" Long
Couldn't load pickup availability

Wire Rope Sleeve, 3/32", Copper, Zinc Plated
Couldn't load pickup availability

Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability

Vision Pro Super
Couldn't load pickup availability

Nylon Cable Tie 4" Black
Couldn't load pickup availability

Turnbuckle, Stainless Steel, Full Thread, 1/2" x 6.00" Take Up
Couldn't load pickup availability

Turnbuckle – Midget, Hook and Hook, Malleable, #26 3/8 - 16
Couldn't load pickup availability

Turnbuckle, Hook and Eye, Galvanized, 5/16" x 4-1/2"
Couldn't load pickup availability
Product Description
Turnbuckles can be used to apply tension to wire rope or cable Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class D
Apply load to the center of end attachment eyes do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
Item#: | 1442300 |
---|---|
Type | Eye and Eye |
Diameter | 5/8 " |
Closed Length | 20-1/2 " |
Working Load Limit | 3,500 lb |
Material | Forged Steel |
Finish | Galvanized |
UNSPSC #: | 24101611 |
TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

