Turnbuckle, Eye and Eye, Galvanized, 3/8" x 6"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together
Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 3/4" x 12"
Couldn't load pickup availability
Eye Bolt with Nut 1/4" x 2" Long
Couldn't load pickup availability
Wire Rope Sleeve, 3/16", Aluminum
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/4", 13,000 lb WLL
Couldn't load pickup availability
Wire Rope Clip, Malleable, Galvanized, 1/8"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Turnbuckle, Body Only, Self-Colored, 1/2" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442193 |
|---|---|
| Type | Eye and Eye |
| Diameter | 3/8 " |
| Closed Length | 11-1/2 " |
| Working Load Limit | 1,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.895 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
