Turnbuckle, Jaw and Eye, Galvanized, 1/2" x 2"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 3/4" x 12"
Couldn't load pickup availability
Eye Bolt with Nut 1/4" x 2" Long
Couldn't load pickup availability
Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 1/4", 1,000 lb WLL
Couldn't load pickup availability
Tarp Strap Epdm Rubber with Hooks 19" Long
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Turnbuckle, Body Only, Galvanized, 1/2" x 2"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 5/16" x 4.00" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Full Thread, 1/2" x 6.00" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442405 |
|---|---|
| Type | Jaw and Eye |
| Diameter | 1/2 " |
| Closed Length | 8-3/4 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
