Turnbuckles Hook and Eye, 400 Lb Safe Load, 1/4" x 4" Takeup
(Pack of
4)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Hook Ceiling Trade Size 4
Couldn't load pickup availability
Spring Link, 3" Length, Anodized Finish
Couldn't load pickup availability
Swivel Eye Bolt Snap, 5/8" Eye Size, 4-1/4" Length, Zinc Finish
Couldn't load pickup availability
Tarp Strap Epdm Rubber with Hooks 24" Long
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x7, 1/16", 480 lbs Breaking Strength
Couldn't load pickup availability
Screw Pin Anchor Shackle, 5/8", 6,500 lb WLL
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1/2" x 2"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 4.00" Take Up
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 14454 |
|---|---|
| Type | Hook and Eye |
| Diameter | 1/4 " |
| Working Load Limit | 400 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 1.15 lb |
