Wedge Type Anchor Bolt, Steel, Zinc Finish, 1/2 x 3-1/2"
(Pack of 10)

Wej-It®

• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 6-31

Frequently Bought Together

Wedge Type Stud Bolt Anchor Steel 3/8 x 2-1/4"

SAE Flat Washer Thru-Hardened Steel 1/2"

Non-Chlorinated Brake Parts Cleaner 14oz

Wedge Type Stud Bolt Anchor Steel 1/2 x 3-3/4"

Wedge Type Stud Bolt Anchor Steel 1/2 x 7"

Wedge Type Stud Bolt Anchor Steel 1/2 x 5-1/2"

Product Description

• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.

Technical Specifications

Item#:	92860
Diameter	1/2 "
Length	3-1/2 "
Thread Length	1 "
Drill Size	1/2 "
Material	Carbon Steel
Finish	Bright Zinc
Type	Wedge Anchor
Size	1/2X3-1/2 "
Minimum Embedment	2 "
UNSPSC #:	31162101
TAA Compliant:	No
Weight:	2.26 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Self-Drilling Wall Anchor 1-5/8"

Conical Screw Anchor Plastic #10 to #12 x 1"

Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"

SNAPTOGGLE® Toggle Bolt Anchor 1/4-20

Conical Screw Anchor Plastic #14 to #16 x 1-3/8"

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"

Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"

Conical Screw Anchor Plastic #8 to #10 x 7/8"

Conical Screw Anchor Kit Plastic 301Pcs

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

Your Recently Viewed Items