Wedge Type Stud Bolt Anchor Steel 3/8 x 5"
(Pack of
10.0)
Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 6-30
Frequently Bought Together

Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability

Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability

Conical Screw Anchor Kit Plastic 401Pcs
Couldn't load pickup availability

Hex Cap Screw Grade 8 Alloy Steel 1/4-20 x 1"
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability

Wedge Type Anchor Bolt Steel 5/8 x 4-1/2"
Couldn't load pickup availability

Wedge Type Anchor Bolt Steel 5/8 x 3-1/2"
Couldn't load pickup availability

Wedge Type Anchor Bolt Steel 1/2 x 5"
Couldn't load pickup availability
Product Description
Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
Item#: | 91604 |
---|---|
Diameter | 3/8 " |
Length | 5 " |
Thread Length | 3-1/4 " |
Drill Size | 3/8 " |
Material | Carbon Steel |
Finish | Bright Zinc |
Type | Wedge Anchor |
Proof Test Load | 2,420 lb |
Length Identification Code | G |
Size | 3/8X5 " |
Minimum Embedment | 1-3/4 " |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.44 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
