706 Multi-Purpose Hard Facing Buildup Stick Rod Electrode, 40 to 45 (WH) HRC Hardness, 110 to 150 Amps, AC/DCRP Polarity, 1/8"
(Pack of
10)
SKU:P12775 Item#: P12775
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Frequently Bought Together
170 Build Up Of Carbon And Low Alloy Steels 3/16
Couldn't load pickup availability
170 Build Up Of Carbon And Low Alloy Steels 1/8
Couldn't load pickup availability
706 Hard Facing Buildup Stick Rod Electrode 5/32"
Couldn't load pickup availability
7310 Carbide Hard Facing MIG Welding Wire 0.045"
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
750 Martensitic Hard Facing Stick Electrode 5/32"
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Oxygen Safety Cap Heavy Duty
Couldn't load pickup availability
ER70S-6 Mild/Carbon Steel MIG Welding Wire 0.035"
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Three Flint Striker
Couldn't load pickup availability
Product Description
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Technical Specifications
| Item#: | P12775 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 1/8 " |
| Base Metal | Multi-Purpose |
| Hardness | 40-45 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.4 lb |
Product Restrictions
