706 Hard Facing Buildup Stick Rod Electrode 3/32"
(Pack of
10.0)
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Frequently Bought Together
706 Hard Facing Buildup Stick Rod Electrode 1/8"
Couldn't load pickup availability
706 Hard Facing Buildup MIG Welding Wire 0.045"
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 1/8"
Couldn't load pickup availability
7222 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
747 Cobalt Stick Rod Electrode 1/8"
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 1/2"
Couldn't load pickup availability
1/2" Drive, Cross-Over Deep Socket, 15/16''
Couldn't load pickup availability
Premium Ceramic Grinding Disk 4-1/2"
Couldn't load pickup availability
Cable Tie 30" White
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Heat Stick 250F Degrees
Couldn't load pickup availability
Heat Stick 650F Degrees
Couldn't load pickup availability
Heat Stick 850F Degrees
Couldn't load pickup availability
Product Description
Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT
Technical Specifications
| Item#: | P12785 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 3/32 " |
| Base Metal | Multi-Purpose |
| Hardness | 40-45 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.0 lb |
Product Restrictions
