Fender Washer Oversized 3/8

Fender Washer Oversized 3/8

Fender Washing, surdimensionné, acier, plaqué zinc, sans bavure, Resisto-Plate® TF, 3/8 "ID, 1-1 / 2" OD
(Paquet de 50)

SKU:P41705 Article#: P41705

Lawson Products

Bourr de surface lisse sans
Épaisseur uniforme
Non-pêche
Spécialement conçu pour une application où un roulement plus grand est requis
Resisto-plate® TF pour une protection maximale contre la rouille et la corrosion

Vérifier la disponibilité

Quantité

Page du catalogue : 26-341

Fréquemment achetés ensemble

Radiator Side Air Baffle Retainer Nylon 11/16

Radiateur Side Air Baff Nylon Nylon 11/16 "

Article#: P18339

Cable Tie Nylon 155mm, Cable Tie for GM, Nylon, Gray, Fits 6.3mm Hole, 155mm Overall Length, 5mm Strap Width

Time de câble nylon 155 mm

Article#: P86126

Air Dam and Grille Push-Type Retainer Nylon 18mm, Air Dam and Grille Push-Type Retainer for GM, Nylon, Black

Nylon Nylon 18 mm

Article#: P85036

Tire Patch Cement 8oz Chemical, Tire Patch Chemical Vulcanizing Cement, 8oz Brush Top Can

Patch du pneu ciment 8oz chimique

Article#: 82538

P Series Lead Clip-On Wheel Weight 1-1/2oz, P Series Lead Clip-On Wheel Weight with Hardened Spring Steel Clips, Uncoated

P.

Article#: 1529766

Symphony All Season Blade 18

Blade d'essuie-glace de la courbe Intelli-Curve 22 "

Article#: 1493052

Front Fender Push-Type Retainer Nylon 20mm, Front Fender Push-Type Retainer for Nissan, Nylon, Black, Fits 8mm Hole

Fender Fender Push-Type Nylon 20 mm

Article#: KT11397

P Series Lead Clip-On Wheel Weight 1-1/2oz, P Series Lead Clip-On Wheel Weight with Hardened Spring Steel Clips, Uncoated

P.

Article#: 1529767

P Series Lead Clip-On Wheel Weight 1-1/2oz, P Series Lead Clip-On Wheel Weight with Hardened Spring Steel Clips, Uncoated

P poids de roue à clips de plomb P. 0,25 oz

Article#: 1529764

Fender Washer 7/16 I.D. 1-3/4 Od 1/8 Thk, Fender Washer With 7/16 Inch I.D. And 1-3/4 Inch Od, 1/8 Inch Thickness

Fender Washer 7/16 I.D. 1-3 / 4 OD 1/8 Thk

Article#: 1679577

Fender Washer 7/32 I.D., 1-1/4 O.D., Fender Washers With 7/32 Inch I.D. And 1-1/4 Inch O.D.

Fender Washer 7/32 I.D., 1-1 / 4 O.D.

Article#: 1679514

Fender Washer 7/32 I.D., 1 O.D., Fender Washer With 7/32 Inch I.D. And 1 Inch O.D., Zinc-Plated Steel With 3/16 Inch Length

Fender Washer 7/32 I.D., 1 O.D.

Article#: 1679513

Butt Connector 22 to 18 AWG Red, Butt Connector, 2-Piece Heat Seal, Red, 22 to 18 AWG, 1.45

Connecteur à bout de 22 à 18 AWG rouge

Article#: 92822

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Lawson Open & Shut Nut & Bolt Bolt, Rust Petrant, SKU DA6152, 20 oz Aerosol Can

Article#: DA6152

Locknut with Nylon Insert Grade 8 5/16-24, Locknut with Nylon Insert, Grade 8, Alloy Steel, Yellow Zinc Finish, Fine Thread

SAE J995C Éconcant avec insert en nylon Grade 8 1/4-20

Article#: 53979

Description du produit

Bourr de surface lisse sans
Épaisseur uniforme
Non-pêche
Spécialement conçu pour une application où un roulement plus grand est requis
Resisto-plate® TF pour une protection maximale contre la rouille et la corrosion

Spécifications techniques

Article#:	P41705
Taper	Laveuse de garde-boue
O.D.	1-1/2 "
IDENTIFIANT.	3/8 "
Matériel	Acier
Finition	Zinc
Description	Rondelles à pouces surdimensionnées
UNSPSC #:	31161823
Conforme à la TAA :	Non
Poids:	0.93 lb

Produits suggérés

Fender Splash Shield Retainer Nylon 20mm, Fender Splash Shield Retainer, Nylon, Black, Fits 8mm Hole, 20mm Head

Fender Splash Shield Retenue Nylon 20 mm

Article#: P53958

Fender Bumper Shield Retainer 11/16

Reposeur de bouclier pour pare-chocs Fender 11/16 "

Article#: P62445

Universal Neoprene Captive Brass Well Nut #10-32, Universal Neoprene Captive Brass Well Nut, #10-32 Thread Size

Universal Nut Nut noix en laiton captif néoprène # 10-32

Article#: 57496

Phillips Round Washer Head Drill Point Screw #8, Phillips Round Washer Head Drill Point Screw, Special Black

Phillips Round Washer Head Point Point Point # 8

Article#: P27606

Rocker Moulding Retainer Plastic 16mm, Rocker Moulding Retainer for Ford Explorer 1993+, Plastic, Black, Fits 8mm Hole

Rocker Mouillage Rettener Plastique 16 mm

Article#: P20681

Symphony All Season Blade 18

Blade d'essuie-glace de la courbe Intelli-Curve 22 "

Article#: 1493052

Shroud Insulating Button Nylon 11/16

Bouton isolant enveloppe nylon 11/16 "

Article#: P21462

Front Fender Push-Type Retainer Nylon 20mm, Front Fender Push-Type Retainer for Nissan, Nylon, Black, Fits 8mm Hole

Fender Fender Push-Type Nylon 20 mm

Article#: KT11397

Traditional Style Wiper Blade 13

Blade d'essuie-glace traditionnel 22 "

Article#: KT14699

Hex Flange Spinlock Nut Steel 3/8-16, Hex Flange Spinlock Nut, Steel, Zinc Finish, 3/8-16 Thread Size, 9/16

Bride hexagonale Spinlock Nut acier 3 / 8-16

Article#: P23727

Phillips Round Washer Head Trim Drill Point Screw, Special Black, #8/M4.2 Diameter, 1-1/4

PHILLIPS Vis de point de perceuse de garniture à tête ronde à tête

Article#: P30411

Front and Rear Bumper Fascia Retainer Plastic 1

Fascia de pare-chocs avant et arrière Plastique 1 "

Article#: P20118

Vos articles récemment consultés