625 Copper and Brass Stick Rod Electrode 3/32"
(Pack of
5.0)
Welds most ferrous and non-ferrous metals and joins most combinations of dissimilar metals (except white metals).
Superior Advantages
• Tough, crack-free, machinable welds
• Easy arc control with little preheat
• High frictional wear resistance
• High strength
Tensile Strength: 110,000 PSIHardness: Rc 21-23Polarity: DC Reverse
Typical Applications
• Brass, bronze or cast iron to steel
•Gear teeth, valves and castings
• Impellers, cams and shafts
Usage ProcedureUse DC reverse polarity. Clean Âsurfaces of grease, rust or scale. Use short arc with weave or stringer bead. No preheating required, except on heavy sections: 500°F (260°C) steel; 900°F (482°C) Âcopper. For TIG use direct current straight polarity (electrode–). Clean Âsurfaces of grease, rust, scale, etc. Use pure argon gas or a mixture of argon/helium for heavy sections. Set the flow rate at 15 to 20 CFH. For best results, use a gas lens collet body. Amperage will depend on ba
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
625 Copper and Brass TIG Wire 1/16"
Couldn't load pickup availability
625 Copper and Brass TIG Wire 3/32"
Couldn't load pickup availability
157T Premium Bronze Solid Tig Wire 1/8X36
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
Heat Stick 650F Degrees
Couldn't load pickup availability
Heat Stick 850F Degrees
Couldn't load pickup availability
Pipe Wrap Around
Couldn't load pickup availability
177888 Plasma Cutting Deflector
Couldn't load pickup availability
20862 Plasma Cutting Electrode
Couldn't load pickup availability
8-7504 Plasma Cutting Tip
Couldn't load pickup availability
Product Description
Welds most ferrous and non-ferrous metals and joins most combinations of dissimilar metals (except white metals).Superior Advantages
• Tough, crack-free, machinable welds
• Easy arc control with little preheat
• High frictional wear resistance
• High strength
Tensile Strength: 110,000 PSIHardness: Rc 21-23Polarity: DC Reverse
Typical Applications
• Brass, bronze or cast iron to steel
•Gear teeth, valves and castings
• Impellers, cams and shafts
Usage ProcedureUse DC reverse polarity. Clean Âsurfaces of grease, rust or scale. Use short arc with weave or stringer bead. No preheating required, except on heavy sections: 500°F (260°C) steel; 900°F (482°C) Âcopper. For TIG use direct current straight polarity (electrode–). Clean Âsurfaces of grease, rust, scale, etc. Use pure argon gas or a mixture of argon/helium for heavy sections. Set the flow rate at 15 to 20 CFH. For best results, use a gas lens collet body. Amperage will depend on ba
Technical Specifications
| Item#: | CW1859 |
|---|---|
| Welding Process | Stick |
| Type | Flux Coated |
| Diameter | 3/32 " |
| Tensile Strength | 110,000 PSI |
| Base Metal | Copper/Brass |
| Hardness | 21-23 HRC |
| Polarity | DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 5.2 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
