DOT Air Brake Compression Run Tee for Nylon Tubing, Male, Brass, 1/2" x 3/8-18 x 1/2", Tube x Pipe x Tube
(Pack of 5)

SKU:1511575 Item#: 1511575

Lawson

• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).

Read More
Usually Ships: Today
While Supplies Last

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_P_5238.jpg

DOT Compression Nut Brass 3/8"

Item#: 84327
DV_ZoomOriginal_P_5235.jpg

DOT Compression Elbow Male 90° Brass 1/2 x 3/8"

Item#: 84287
DV_ZoomOriginal_P_5236.jpg

DOT Compression Connector Male Brass 1/2 x 3/8"

Item#: 84271
DV_ZoomOriginal_P_5235.jpg

DOT Compression Elbow Male 90° Brass 3/8 x 1/4"

Item#: 84284
DV_ZoomOriginal_I_91785.jpg

DOT Connector Male Brass 1/4 x 1/8-27

Item#: 91785
DV_ZoomOriginal_I_97691.jpg

Grease Gun Thin Nose Hydraulic Coupler 1/8"

Item#: 97691
DV_ZoomOriginal_P_10018.jpg

DOT Connector Male Brass 1/4 x 1/4-18

Item#: 57505
DV_ZoomOriginal_I_91797.jpg

DOT Elbow Male Nylon 3/8 x 1/4-18

Item#: 91797
DV_ZoomOriginal_P_5099.jpg

Miniature Clamp SS 5/16 to 7/8"

Item#: 86723
DV_ZoomOriginal_P_30912.jpg

Hex Head Plug Brass 1/2-14 Male NPT

Item#: 5365
DV_ZoomOriginal_P_1361.jpg

Hose Clamp 304 SS 9/16 to 1-1/4"

Item#: 86726
DV_ZoomOriginal_P_10018.jpg

DOT Connector Male Brass 3/8 x 1/4-18

Item#: 57506
DV_ZoomOriginal_I_DA6152.jpg

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Item#: DA6152
DV_ZoomOriginal_P_HT5273.jpg

Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece

Item#: DY89320050
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 1/4-20

Item#: 53979
DV_ZoomOriginal_I_P52994.jpg

Wire Cup Brush 2-3/4" Dia., .020" Wire Dia., 5/8"-11 Arbor

Item#: PM08153300
DV_ZoomOriginal_I_DY02552100.jpg

Nut Torq Tite Hex Flange, 3/8-16

Item#: DY02552100
DV_ZoomOriginal_I_1359545.jpg

Apollo 2004 Super Glue Adhesive 3g

Item#: 1359545
DV_ZoomOriginal_I_P52994.jpg

Wire Cup Brush 2-3/4" Dia., .020" Wire Dia., 5/8"-11 Arbor

Item#: PM08153300
DV_ZoomOriginal_I_DY02552100.jpg

Nut Torq Tite Hex Flange, 3/8-16

Item#: DY02552100
DV_ZoomOriginal_I_1359545.jpg

Apollo 2004 Super Glue Adhesive 3g

Item#: 1359545

Product Description

• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).

Technical Specifications

Item#: 1511575
Manufacturer Model #: 84297
Fitting Type Compression - Nylon Tubing
Style DOT
Material Brass
Configuration Male Run Tee
Connection Type A x B x C Tube x Pipe x Tube
Fitting Dimension A 1/2 "
Fitting Dimension B 3/8-18
Fitting Dimension C 1/2 "
Size 1/2X3/8
Type Compression
UNSPSC #: 25171700
TAA Compliant: No
Weight: 1.41 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Your Recently Viewed Items