TOGGLER® SnapSkru® Nylon Self-Drilling Drywall Anchors

TOGGLER® SnapSkru® Nylon Self-Drilling Drywall Anchors

SnapSkru® Standard Self-Drilling Wall Anchor Nylon
(Pack of 25.0)

Toggler®

• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 6-41

Frequently Bought Together

Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

USS Flat Washer Thru-Hardened Steel 1/4"

PTO Pin Lock 1/4 x 2-1/2"

IFI 100/107 Top Locknut Grade C 5/8-11

Butt Connector 22 to 18 AWG Clear

Butt Connector 16 to 14 AWG Blue

USS Flat Washer Thru-Hardened Steel 3/8"

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"

Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"

Wing Type Toggle Bolt Steel #10-24 x 3"

Product Description

• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.

Technical Specifications

Item#:	50878
Length	1 5/8 "
Type	Wall Anchor
Body Diameter	0.6020 "
Diameter	31/50 "
Material	Nylon
Screw Diameter	No. 6 - No. 10 "
Recommended Screw Length	Item Thickness + 1-1/4"
Flange Diameter	0.6 "
UNSPSC #:	31162103
TAA Compliant:	Yes
Weight:	0.15 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Self-Drilling Wall Anchor 1-5/8"

Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"

Conical Screw Anchor Plastic #10 to #12 x 1"

Conical Screw Anchor Plastic #14 to #16 x 1-3/8"

SNAPTOGGLE® Toggle Bolt Anchor 1/4-20

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"

Conical Screw Anchor Plastic #8 to #10 x 7/8"

Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"

Conical Screw Anchor Kit Plastic 301Pcs

Your Recently Viewed Items