Turnbuckle, Hook and Eye, Galvanized, 3/8" x 6"
(Pack of
1)
Turnbuckles can be used to apply tension to wire rope or cable
Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class F
Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together

Quick Link, Stainless Steel, 3/16", 800 LB WLL
Couldn't load pickup availability

Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
Couldn't load pickup availability

Screw Pin Anchor Shackle, 1/2", 6,000 lb WLL
Couldn't load pickup availability

Wire Rope Sleeve, 1/16", Aluminum
Couldn't load pickup availability

Drum Dolly 55 Gal. 1400 Lb Capacity 5 Wheel
Couldn't load pickup availability

Clevis Slip Hook, Grade 70, 3/8", 6,600 lb WLL
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability

PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability

Turnbuckle, Jaw and Eye, Galvanized, 1" x 12"
Couldn't load pickup availability

Turnbuckle, Body Only, Self-Colored, 1" x 12"
Couldn't load pickup availability

Turnbuckle, Aluminum, Eye and Eye, 3/16" x 1.61" Take Up
Couldn't load pickup availability
Product Description
Turnbuckles can be used to apply tension to wire rope or cable Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class F
Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
Item#: | 1442360 |
---|---|
Type | Hook and Eye |
Diameter | 3/8 " |
Closed Length | 11-3/4 " |
Working Load Limit | 1,000 lb |
Material | Forged Steel |
Finish | Galvanized |
UNSPSC #: | 24101611 |
TAA Compliant: | Yes |
Weight: | 0.91 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov


