Turnbuckles Eye and Eye, 2200 Lb Safe Load, 1/2" x 9" Takeup
(Pack of
2)
SKU:14428 Item#: 14428
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Screw Pin Anchor Shackle, 3/4", 9,500 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/4", 13,000 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 5/8", 6,500 lb WLL
Couldn't load pickup availability
Grade 43 Clevis Slip Hook with Latch, 1/4", 2,600 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 1/4", 1,500 lb WLL
Couldn't load pickup availability
Clevis Grab Hook, Grade 80, 3/8", 7,100 lb WLL
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Eye, 5/16" x 4" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 14428 |
|---|---|
| Type | Eye and Eye |
| Diameter | 1/2 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 3.92 lb |
