664 Self Shielding Mild Steel Flux Core Mig Wire .035X10LB
(Pack of
10.0)
• Self shielded — no gas required
• Designed for single pass welds only
• Excellent for galvanized steel and thin metal
• Minimum spatterEasy to useAll-position
• Operates at low voltage and amperage— reduces burn-through on thin materials
• Tensile strength: 76,000 psi/524 Mpa
• Hardness: 93 Rb min
• Current: DCEN
• Gas: self-shielding
Remove heavy contamination, scaly rust, layered paint and other substances that may interfere with the arc. Galva-Tech FC is designed to weld through most foreign contaminants, but precleaning always helps. When working on sheet metal, tack welding the joint all along the seam helps to reduce distortion; however, it usually cannot be eliminated. Using X-Ergon Kul-Therm™ on both sides of the weld and using the skip weld technique will also help to reduce distortion. Use a stringer bead with low voltage and a drag technique. Allow welds to cool in still air.
Frequently Bought Together
660 Mild Steel Flux Core Low Hydrogen Mig Wire .045X33Lb
Couldn't load pickup availability
102 High Strength Steel Electrode 3/32
Couldn't load pickup availability
106 Mild Steel All Purpose Electrode 3/32
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Rosin Core Solder 1/16"
Couldn't load pickup availability
Rosin Core Solder 1/16"
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
9-6501 Plasma Cutting Tip
Couldn't load pickup availability
9-6004 Plasma Cutting Shield Cup
Couldn't load pickup availability
177888 Plasma Cutting Deflector
Couldn't load pickup availability
Product Description
• Self shielded — no gas required• Designed for single pass welds only
• Excellent for galvanized steel and thin metal
• Minimum spatterEasy to useAll-position
• Operates at low voltage and amperage— reduces burn-through on thin materials
• Tensile strength: 76,000 psi/524 Mpa
• Hardness: 93 Rb min
• Current: DCEN
• Gas: self-shielding
Remove heavy contamination, scaly rust, layered paint and other substances that may interfere with the arc. Galva-Tech FC is designed to weld through most foreign contaminants, but precleaning always helps. When working on sheet metal, tack welding the joint all along the seam helps to reduce distortion; however, it usually cannot be eliminated. Using X-Ergon Kul-Therm™ on both sides of the weld and using the skip weld technique will also help to reduce distortion. Use a stringer bead with low voltage and a drag technique. Allow welds to cool in still air.
Technical Specifications
| Item#: | EG66440035 |
|---|---|
| Welding Process | Flux-Core Arc Welding |
| Type | Flux-Cored Wire |
| Diameter | .035 |
| Base Metal | Galvanized Steel |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 11.3 lb |
