Tuyau hydraulique loc, nitrile, 1-textile tressé, 5/16 "ID, 0,55" OD, 50 ', 300psi
(Paquet de
1)
SKU:1644783 Article#: 1644783
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.
• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Caoutchouc de tuyau hydraulique MXT 0,55 "x 50 '
Impossible de charger la disponibilité du service de retrait
Caoutchouc de tuyau hydraulique MXT 0,68 "x 400 '
Impossible de charger la disponibilité du service de retrait
EC215 Gagnant du tuyau hydraulique Rubber 0,53 "x 250 '
Impossible de charger la disponibilité du service de retrait
Protecteur du tuyau hydraulique 4 x 2-1 / 2 "jaune
Impossible de charger la disponibilité du service de retrait
Couplage de tuyau à serrage 1/2 "x 1 / 2-14
Impossible de charger la disponibilité du service de retrait
Buna t-ring à filet droit buna-n 0,468 x 0,078 "
Impossible de charger la disponibilité du service de retrait
Cramp miniature SS 5/16 à 7/8 "
Impossible de charger la disponibilité du service de retrait
Dot Compression Union laiton 1/4 "
Impossible de charger la disponibilité du service de retrait
Pipe Street Elbow Brass 90 ° 3/8-18 x 3 / 8-18
Impossible de charger la disponibilité du service de retrait
Contre-écrou avec insert en nylon Grade 8 5 / 16-18
Impossible de charger la disponibilité du service de retrait
Lock POP PIN 1/4 x 2-1 / 2 "
Impossible de charger la disponibilité du service de retrait
USS Flat Washer Thru-Harded Steel 3/8 "
Impossible de charger la disponibilité du service de retrait
Caoutchouc de tuyau hydraulique MXT 0,55 "x 50 '
Impossible de charger la disponibilité du service de retrait
Caoutchouc de tuyau hydraulique MXT 0,68 "x 400 '
Impossible de charger la disponibilité du service de retrait
EC215 Gagnant du tuyau hydraulique Rubber 0,53 "x 250 '
Impossible de charger la disponibilité du service de retrait
Description du produit
Gates LOC Lock-On Hose is ideal for petroleum-based hydraulic oils, glycol anti–freeze compounds, water, engine lubricating oils and air. Lock–On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings.• Recommended For: Petroleum-based hydraulic oils, glycol anti-freeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings
• For use with Field Attachable LOC Couplings [G36 Series], use clamp over G37 single bead and G38 barbed fittings with clamp
• Oil and mildew resistant textile braided cover impregnated with synthetic rubber
• Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F (+52°C)
Spécifications techniques
| Article#: | 1644783 |
|---|---|
| No de modèle du fabricant : | 5LOC X50FT |
| Industriel / hydraulique | Hydraulique |
| Taper | Caoutchouc - tresse en tissu |
| Catégorie / performance | Basse pression |
| Note de l'industrie 1 | N / A |
| Numéro de série du fabricant | 5loc |
| Nom de la série du fabricant | LOL PLUS |
| IDENTIFIANT. | 3/8 (-6) " |
| Tuyau O.D. | 0.63 " |
| Pression de travail | 300 psi |
| Pression d'éclatement | 1200 psi |
| Rayon de pliage | 3 " |
| Matériau de tube intérieur | Nitrile |
| Renforcement du tuyau | 1 Braitte, textile |
| Matériau de couverture de tuyau | Nitrile modifié - Type C2 |
| Température minimale | -40 ° F |
| Température maximale | 250 ° F |
| Couleur | Noir |
| Longueur | 25 pieds |
| Taille du tableau de bord | 5 |
| UNSPSC #: | 40142020 |
| Conforme à la TAA : | Non |
