246 Carbide Hard Facing Stick Rod Electrode, 50 to 60 HRC Hardness, 200 to 260 Amps, AC/DCRP Polarity, 18" Length, 1/2"
(Pack of
15)
SKU:P12998 Item#: P12998
Designed for high abrasion resistance in low to moderate impact situations.
Superior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
High Abrasion, Low Impact Resistance
Hardness: Rc 60 (2nd pass)No. of Passes: Three maximumPolarity: AC or DC
Use on manganese and carbon steels
Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Direct electrode 90° to applying surface. Use 1/4" 7355 for out-of-position welding.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
7230 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
7370 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
194 High Impact Manganese Steel Alloy 1/8
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 5/32"
Couldn't load pickup availability
7350 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
H7 Carbide Hard Facing MIG Welding Wire 1/16"
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
100 Piece, 1/4" Shank Master Bit Set
Couldn't load pickup availability
X-Tractalloy Welding Electrode Non-Conductive Flux 3/32 5/64
Couldn't load pickup availability
777 Stainless Steel Stick Rod Electrode 1/8"
Couldn't load pickup availability
E6013 Mild/Carbon Steel Stick Electrode 1/8"
Couldn't load pickup availability
Product Description
Designed for high abrasion resistance in low to moderate impact situations.Superior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
High Abrasion, Low Impact Resistance
Hardness: Rc 60 (2nd pass)No. of Passes: Three maximumPolarity: AC or DC
Use on manganese and carbon steels
Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Direct electrode 90° to applying surface. Use 1/4" 7355 for out-of-position welding.
Technical Specifications
| Item#: | P12998 |
|---|---|
| Welding Process | Stick |
| Type | Tubular |
| Diameter | 1/2 " |
| Length | 18 " |
| Base Metal | Carbide |
| Carbide Type | Chromium |
| Hardness | 50-60 HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 16.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
