750 Martensitic Hard Facing Stick Rod Electrode, 55 to 60 HRC Hardness, 80 to 120 Amps, AC/DCRP Polarity, 1/8"
(Pack of
10)
SKU:CW1514 Item#: CW1514
Designed for moderate abrasion resistance and impact situations.
Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
All-position alloy for carbon and alloy steels
Hardness: Rc 55-60
Polarity: AC or DC Reverse
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
Technical TipFor austenitic manganese steel, use a buffer layer of CRONAWEAR™ 7770, followed by multiple passes of CRONAWEAR 750 (to achieve full hardness). Keep the arc close. For vertical welds, use rapid weave and hesitate over each crater before extinguishing arc.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 13-20
Frequently Bought Together
7770 Hard Facing Buildup Stick Rod Electrode 1/4"
Couldn't load pickup availability
706 Hard Facing Buildup MIG Welding Wire 0.045"
Couldn't load pickup availability
676 Flux Core Wire Extreme Abrasion Moderate Impact .045X33LBS
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18
Couldn't load pickup availability
7500 Martensitic MIG Welding Wire 0.045"
Couldn't load pickup availability
750 Martensitic Stick Rod Electrode 5/32"
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Rosin Core Solder 1/16"
Couldn't load pickup availability
333 Dissimilar Steel TIG Wire 1/16"
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Single Flint Striker
Couldn't load pickup availability
Product Description
Designed for moderate abrasion resistance and impact situations.Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
All-position alloy for carbon and alloy steels
Hardness: Rc 55-60
Polarity: AC or DC Reverse
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
Technical TipFor austenitic manganese steel, use a buffer layer of CRONAWEAR™ 7770, followed by multiple passes of CRONAWEAR 750 (to achieve full hardness). Keep the arc close. For vertical welds, use rapid weave and hesitate over each crater before extinguishing arc.
Technical Specifications
| Item#: | CW1514 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 1/8 " |
| Base Metal | Martensitic |
| Hardness | 55-60 HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
