7500 Martensitic Hard Facing MIG Welding Wire, Flux Cored, 55 to 60 HRC Hardness, 75Ar/25C02 Shielding Gas, DCRP Polarity, 0.035"
(Pack of
25)
SKU:CW3066 Item#: CW3066
Designed for moderate abrasion resistance and impact situations.
Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
High alloy martensitic flux-cored hardfacing wire for moderate abrasion and impact
Hardness: Rc 55-60Polarity: DC ReverseGas: 75% Ar, 25% CO2 or 100% CO2
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
• Torch cuttable alloy for buildup • Exceptional impact and abrasive wear resistance
Technical TipNot recommended for austenitic manganese steel without a buffer layer of 7770M-FC.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 13-20
Frequently Bought Together
7220 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 5/32"
Couldn't load pickup availability
7222 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18
Couldn't load pickup availability
7500 Martensitic MIG Welding Wire 0.045"
Couldn't load pickup availability
750 Martensitic Stick Rod Electrode 5/32"
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Three Flint Striker
Couldn't load pickup availability
Oxy-Therm Cutting Rod 1/4 x 24"
Couldn't load pickup availability
X-Tractalloy Extracting Welding Electrode Non-Conductive Flux 3/32
Couldn't load pickup availability
Product Description
Designed for moderate abrasion resistance and impact situations.Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
High alloy martensitic flux-cored hardfacing wire for moderate abrasion and impact
Hardness: Rc 55-60Polarity: DC ReverseGas: 75% Ar, 25% CO2 or 100% CO2
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
• Torch cuttable alloy for buildup • Exceptional impact and abrasive wear resistance
Technical TipNot recommended for austenitic manganese steel without a buffer layer of 7770M-FC.
Technical Specifications
| Item#: | CW3066 |
|---|---|
| Welding Process | MIG |
| Type | Flux Cored |
| Diameter | .035 " |
| Base Metal | Martensitic |
| Hardness | 55-60 HRC |
| Shielding Gas | 75Ar/25C02 |
| Polarity | DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 28.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
