777 Austenitic High Impact Hard Facing Stick Rod Electrode, 43 to 47 (WH) HRC Hardness, 90 to 125 Amps, AC/DCRP Polarity, 1/8"
(Pack of
5)
Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI Hardness: Rc 47 Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 13-21
Frequently Bought Together
H3 Martensitic Hard Facing MIG Welding Wire 0.045"
Couldn't load pickup availability
676 Flux Core Wire Extreme Abrasion Moderate Impact .045X33LBS
Couldn't load pickup availability
7500 Martensitic MIG Welding Wire 0.045"
Couldn't load pickup availability
777 Austenitic Hard Facing Stick Electrode 5/32"
Couldn't load pickup availability
173 Multi Purpose High Deposition Alloy For Joining And Build Up 1/8
Couldn't load pickup availability
671 Impact And Abrasion Resistant Flux Cored Self Sheilded 1/16X25LB
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Single Replacement Flint
Couldn't load pickup availability
Oxy Acetylene Fuel Gas Single Flint Striker
Couldn't load pickup availability
24A-62 MIG Welding Nozzle 5/8"
Couldn't load pickup availability
Product Description
Designed for low abrasion resistance and high impact situations.Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI Hardness: Rc 47 Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).
Technical Specifications
| Item#: | CW1063 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 1/8 " |
| Base Metal | Austenitic |
| Hardness | 43-47 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 5.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
