Home Welding Hardfacing Alloys Low Abrasion/High Impact (Austenitic) 7109 Austenitic Hard Facing Welding Wire 0.045"
Hardfacing Alloys
DV_ZoomOriginal_I_CW3587.jpg
DV_ZoomOriginal_I_CW3587.jpg

7109 Austenitic Hard Facing MIG Welding Wire, Flux Cored, DCRP Polarity, Quiet and Minimal Sparks, 0.045"
(Pack of 25)

Item#: CW3587

Lawson Products

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
Buildup and joining of manganese steels and carbon steels
Hardness: Up to Rc 54 (3rd pass)No. of Passes: Up to threePolarity: DC ReverseGas: None or 75% Ar, 25% CO2
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureWhen CRONALLOY EAGLE 7109M-FC is applied via the open arc method, high deposition rates are possible. Weld current of 28-30V/250A will give a deposition of approximately 12lbs./hr.DC current, reverse polarity is preferred for better arc stability. For general hardfacing, wire stickout may vary from 3/4" to 1-1/2". On low current applications (175 – 240 amps), approximately 1" stickout should be maintained.The hardness figures shown are typical, and variations, higher or lowe

Read More
Check Availability
Usually Ships: Today
While Supplies Last

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_EG17800375.jpg

178 Ultimate Abrasion Resistance 3/8X18IN

Item#: EG17800375
DV_ZoomOriginal_I_EG17440000.jpg

174 Gray High Abrasion Moderate Impact 1/8

Item#: EG17440000
DV_ZoomOriginal_I_EG17340000.jpg

173 Multi Purpose High Deposition Alloy For Joining And Build Up 1/8

Item#: EG17340000
DV_ZoomOriginal_P_WDPMP1058.jpg

173 Multi Purpose High Deposition Alloy For Joining And Build Up 3/16

Item#: EG17320000
DV_ZoomOriginal_P_WDPMP1065.jpg

194 High Impact Manganese Steel Alloy 5/32

Item#: EG19430000
DV_ZoomOriginal_I_EG67280045.jpg

672 Extreme Impact And Abrasion Resistant Flux Cored Alloy .045X25LB

Item#: EG67280045
DV_ZoomOriginal_I_DY89310247.jpg

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper

Item#: DY89310247
DV_ZoomOriginal_I_1495189.jpg

Stepdown Butt Connector 16 to 14/12 to 10 AWG

Item#: 1495189
DV_ZoomOriginal_P_506_WB.jpg

Self-Drilling Screw Hex Head #10-16 x 3/4"

Item#: 84931
DV_ZoomOriginal_I_20543.jpg

Rosin Core Solder 1/16"

Item#: 20543
DV_ZoomOriginal_I_CW5130.jpg

331 Mild and Carbon Steel MIG Welding Wire 0.03"

Item#: CW5130
DV_ZoomOriginal_P_WDPMP1100.jpg

163 Arc-Cut Synthetic Carbon Arc Electrode

Item#: EG16300250
DV_ZoomOriginal_P_HT5301.jpg

Swivel Head Ratchet 1/4 Drive

Item#: DY89310009
DV_ZoomOriginal_P_CTPMP1005.jpg

Z-Flex 2" Dia., 60 Grit, Roll Lock Mount, Zirconia Alumina

Item#: DY87802064
DV_ZoomOriginal_P_CTPMP1005.jpg

Z-Flex 2" Dia., 36 Grit, Roll Lock Mount, Zirconia Alumina

Item#: DY87802039
DV_ZoomOriginal_P_HT5301.jpg

Swivel Head Ratchet 1/4 Drive

Item#: DY89310009
DV_ZoomOriginal_P_CTPMP1005.jpg

Z-Flex 2" Dia., 60 Grit, Roll Lock Mount, Zirconia Alumina

Item#: DY87802064
DV_ZoomOriginal_P_CTPMP1005.jpg

Z-Flex 2" Dia., 36 Grit, Roll Lock Mount, Zirconia Alumina

Item#: DY87802039

Product Description

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
Buildup and joining of manganese steels and carbon steels
Hardness: Up to Rc 54 (3rd pass)No. of Passes: Up to threePolarity: DC ReverseGas: None or 75% Ar, 25% CO2
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureWhen CRONALLOY EAGLE 7109M-FC is applied via the open arc method, high deposition rates are possible. Weld current of 28-30V/250A will give a deposition of approximately 12lbs./hr.DC current, reverse polarity is preferred for better arc stability. For general hardfacing, wire stickout may vary from 3/4" to 1-1/2". On low current applications (175 – 240 amps), approximately 1" stickout should be maintained.The hardness figures shown are typical, and variations, higher or lowe

Technical Specifications

Item#: CW3587
Welding Process MIG
Type Flux Cored
Diameter .045 "
Base Metal Austenitic
Hardness 45-54 (WH) HRC
Shielding Gas No Gas
Polarity DCRP
UNSPSC #: 23271810
TAA Compliant: Yes
Weight: 27.5 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_WDPMP1060.jpg

176 Extreme Abrasion With Impact 1/4X18IN

Item#: EG17610250
DV_ZoomOriginal_I_CW1514.jpg

750 Martensitic Hard Facing Stick Electrode 1/8"

Item#: CW1514
DV_ZoomOriginal_I_CW1878.jpg

7770 Hard Facing Buildup Stick Rod Electrode 3/16"

Item#: CW1878
DV_ZoomOriginal_I_CW1880.jpg

7770 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: CW1880
DV_ZoomOriginal_I_CW6041.jpg

H3 Martensitic Hard Facing MIG Welding Wire 0.045"

Item#: CW6041
DV_ZoomOriginal_I_CW1876.jpg

7770 Hard Facing Buildup Stick Rod Electrode 1/4"

Item#: CW1876
DV_ZoomOriginal_I_P19557.jpg

706 Hard Facing Buildup MIG Welding Wire 0.045"

Item#: P19557
DV_ZoomOriginal_P_WDPMP9202.jpg

676 Flux Core Wire Extreme Abrasion Moderate Impact .045X33LBS

Item#: EG67680045
DV_ZoomOriginal_I_CW1065.jpg

711 Carbide Hard Facing Stick Rod Electrode 5/32"

Item#: CW1065
DV_ZoomOriginal_I_CW1832.jpg

747 Cobalt Stick Rod Electrode 1/8"

Item#: CW1832
DV_ZoomOriginal_I_EG19440000.jpg

194 High Impact Manganese Steel Alloy 1/8

Item#: EG19440000
DV_ZoomOriginal_I_P19557.jpg

7310 Carbide Hard Facing MIG Welding Wire 0.045"

Item#: CW1803

Your Recently Viewed Items