7355 Carbide Hard Facing Stick Rod Electrode 1/4"
(Pack of
10.0)
High abrasion and heavy impact resistance for austenitic manganese steel
Superior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
Hardness: Rc 62 (2nd pass)No. of Passes: Up to threePolarity: AC or DC Reverse
Can be used for out-of-position welding
Typical Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Direct electrode 90° to applying surface. Use 1/4" 7355 for out-of-position welding.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog Page#: 13-17
Frequently Bought Together
706 Hard Facing Buildup Stick Rod Electrode 1/8"
Couldn't load pickup availability
246 Carbide Hard Facing Stick Rod Electrode 1/2"
Couldn't load pickup availability
7355 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
176 Extreme Abrasion With Impact 3/8X18IN
Couldn't load pickup availability
676 Flux Core Wire Extreme Abrasion Moderate Impact 1/16X33LBS
Couldn't load pickup availability
174 Gray High Abrasion Moderate Impact 3/16
Couldn't load pickup availability
Spray Zinc Coating 14oz
Couldn't load pickup availability
Industrial Green Zinc Phosphate Primer
Couldn't load pickup availability
Mega Wear-Flex Kit Self Leveling
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
Rosin Core Solder 0.032"
Couldn't load pickup availability
Solid Solder 1/32"
Couldn't load pickup availability
Flint For Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 7/16-14
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/4-10
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/16-18
Couldn't load pickup availability
Product Description
High abrasion and heavy impact resistance for austenitic manganese steelSuperior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
Hardness: Rc 62 (2nd pass)No. of Passes: Up to threePolarity: AC or DC Reverse
Can be used for out-of-position welding
Typical Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Direct electrode 90° to applying surface. Use 1/4" 7355 for out-of-position welding.
Technical Specifications
| Item#: | CW1918 |
|---|---|
| Welding Process | Stick |
| Type | Tubular |
| Diameter | 1/4 " |
| Length | 18 " |
| Base Metal | Carbide |
| Carbide Type | Chromium |
| Hardness | 52-62 HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 10.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
