Weatherhead H145 Hydraulic Hose, Neoprene, 2-Steel Braided, 1/2" ID, 11/16" OD, 250' Length, 3045PSI, SAE 100R17
(Pack of
250)
SKU:64626 08 Item#: 64626 08
250 ft. rolls consist of no more than three pieces with none shorter than 25 feet. Total length may vary ±25%.
• Agency Ratings: SAE 100R17AT
• Fittings Certified: Z-Series; U-Series (-6 through -12); 430 U-Series (-16 only); S-Series (except -4 and -10)
• Agency Approvals: MSHA, Marine Application J1942/1 Hydraulic Service
• Construction:
– Inner Tube: Nitrile
– Reinforcement: Single braid (-4, -6); double braid (-8 through -16)
– Cover: Neoprene
• Temperature Range:
– -4 through -8: –40°F to +250°F (–40°C to +121°C)
– -10 through -16: –40°F to +212°F (–40°C to +100°C)
• Application Notes:
– Used for high-pressure hydraulic lines on off-road equipment, farm equipment and other high pressure applications
– Tight minimum bend radius and improved flexibility
– Provides 3,045 PSI working pressure rating for all sizes
Important: Weatherhead no longer supports the use of the U Series fitting on the 1/4" H145. The Z Series fitting is the only approved fitting for this diameter of the H145.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
Frequently Bought Together
Weatherhead H430 Hydraulic Hose 1-7/8" x 50'
Couldn't load pickup availability
Weatherhead H430 Hydraulic Hose 15/16" x 50'
Couldn't load pickup availability
Avagard PVC Water Hose Assembly 3/4" x 50'
Couldn't load pickup availability
Hydraulic Plug, 1-1/16-12"(12) Male JIC SAE 37 Degree Flare
Couldn't load pickup availability
Straight Thread O-Ring Buna-N 0.755 x 0.097"
Couldn't load pickup availability
Z Series Crimp-On Hose End 3/4" x 1-3/16-12
Couldn't load pickup availability
Quick Disconnect Coupler Steel 1/4" x 1/4-18
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/4" x 9/16-18
Couldn't load pickup availability
Hex Cap Screw Property Class 12.9 M20-2.5 x 80mm
Couldn't load pickup availability
Hex Cap Screw Property Class 10.9 M6-1 x 35mm
Couldn't load pickup availability
Lock And Load Interchangeable Small Punch and Chisel Set, 13pc
Couldn't load pickup availability
Weatherhead H430 Hydraulic Hose 15/16" x 50'
Couldn't load pickup availability
Avagard PVC Water Hose Assembly 3/4" x 50'
Couldn't load pickup availability
AG-Lite Rubber Water Hose Lead In 5/8" x 6'
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
Product Description
250 ft. rolls consist of no more than three pieces with none shorter than 25 feet. Total length may vary ±25%.• Agency Ratings: SAE 100R17AT
• Fittings Certified: Z-Series; U-Series (-6 through -12); 430 U-Series (-16 only); S-Series (except -4 and -10)
• Agency Approvals: MSHA, Marine Application J1942/1 Hydraulic Service
• Construction:
– Inner Tube: Nitrile
– Reinforcement: Single braid (-4, -6); double braid (-8 through -16)
– Cover: Neoprene
• Temperature Range:
– -4 through -8: –40°F to +250°F (–40°C to +121°C)
– -10 through -16: –40°F to +212°F (–40°C to +100°C)
• Application Notes:
– Used for high-pressure hydraulic lines on off-road equipment, farm equipment and other high pressure applications
– Tight minimum bend radius and improved flexibility
– Provides 3,045 PSI working pressure rating for all sizes
Important: Weatherhead no longer supports the use of the U Series fitting on the 1/4" H145. The Z Series fitting is the only approved fitting for this diameter of the H145.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
*Use 430 U-Series fittings only. Must be crimped with T-420, T-440 or T-480 crimpers and corresponding dies and rings.
Technical Specifications
| Item#: | 64626 08 |
|---|---|
| Industrial / Hydraulic | Hydraulic |
| Type | Rubber - Steel Braided |
| Category / Performance | High Pressure |
| Industry Rating 1 | SAE 100R17 |
| Industry Rating | MSHA Accepted, Marine Application J1942/1 Hydraulic only |
| Manufacturer Series Number | H145 |
| Manufacturer Series Name | Weatherhead |
| I.D. | 1/2 (-8) " |
| Hose O.D. | 11/16 " |
| Working Pressure | 3,045 PSI |
| Burst Pressure | 12,180 PSI |
| Fitting Series | Z Series, U Series, S Series |
| Bend Radius | 3-1/2 " |
| Inner Tube Material | Nitrile |
| Hose Reinforcement | 2 Steel Braids |
| Hose Cover Material | Neoprene |
| Temperature | High |
| Material | Hydraulic Oil |
| Applications | Hydraulic - Constant Flow |
| Temperature Range | -40F to +212F |
| UNSPSC #: | 40142020 |
| TAA Compliant: | No |
| Weight: | 92.0 lb |
