M4KL Hydraulic Hose, Nitrile, 2-Wire Braided, 1-1/2" ID, 2.11" OD, 165' Length, 4,000 PSI Working Pressure
(Pack of
165)
SKU:1645201 Item#: 1645201
Global M4KL Mega400™ PolarFlex™ Low-Temp hose is recommended for extremely low temperature high-pressure hydraulic applications. Easy to route and to install in extremely tight areas. Exceeds SAE 100R19 and ISO11237 R19. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp™ Couplings, Stainless Steel B Couplings (-4 through -8), Stainless Steel S Couplings (-12 and -16).
• Recommended for high-pressure hydraulic applications in low-temperature environments
• For use with GlobalSpiral™ Couplings [G20 Series], MegaCrimp™ Couplings [G25 Series], Stainless Steel Braid Couplings [G17 Series] and Stainless Steel Spiral Couplings [G18 Series]
• Resistant to cover cracking at low temperature and tight bend radius
• Provides bend radius up to 1/3 of the SAE specification and greater flexibility for easier routing
• Tested to 600,000 impulse cycles, 3 times the industry standard
• Meets Flame Resistance Acceptance Designation MSHA 2G
• Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms in very low temperature environments
• M4KL has tighter minimum bend radius than SAE 100R19 with 4000 PSI constant working pressure for all ID's
• 70% of EN 857 2SC and 50% of EN 853 2SN bend radius at rated working pressure
• Alternative to spiral hoses in high pressure lines where flexibility is required
• Resistant to cover cracking at low temperature and tight bend radius
• Validated with MegaCrimp™
• Working pressure: 28 MPa
• Cover: MSHA approved
Temperature Range:
• -57°C to +100°C
• -70°F to +212°F
• Design factor: 4:1
• Size: 1/4" to 3/4"
Frequently Bought Together
MXT Hydraulic Hose Rubber 0.68" x 50'
Couldn't load pickup availability
SAE R16S Hydraulic Hose Rubber 0.54" x 50'
Couldn't load pickup availability
M2T Hydraulic Hose Rubber 0.56" x 50'
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/2" x 7/8-14
Couldn't load pickup availability
Hydraulic Cap Nut, 7/8-14"(10) Female JIC SAE 37 Degree Flare
Couldn't load pickup availability
Hydraulic Cap Nut, 1-1/16-12"(12) Female JIC SAE 37 Degree Flare
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 9/16 to 1-1/16"
Couldn't load pickup availability
DOT Union Nylon 3/8 x 3/8"
Couldn't load pickup availability
Hex Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability
MXT Hydraulic Hose Rubber 0.68" x 50'
Couldn't load pickup availability
SAE R16S Hydraulic Hose Rubber 0.54" x 50'
Couldn't load pickup availability
M2T Hydraulic Hose Rubber 0.56" x 50'
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Product Description
Global M4KL Mega400™ PolarFlex™ Low-Temp hose is recommended for extremely low temperature high-pressure hydraulic applications. Easy to route and to install in extremely tight areas. Exceeds SAE 100R19 and ISO11237 R19. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp™ Couplings, Stainless Steel B Couplings (-4 through -8), Stainless Steel S Couplings (-12 and -16).• Recommended for high-pressure hydraulic applications in low-temperature environments
• For use with GlobalSpiral™ Couplings [G20 Series], MegaCrimp™ Couplings [G25 Series], Stainless Steel Braid Couplings [G17 Series] and Stainless Steel Spiral Couplings [G18 Series]
• Resistant to cover cracking at low temperature and tight bend radius
• Provides bend radius up to 1/3 of the SAE specification and greater flexibility for easier routing
• Tested to 600,000 impulse cycles, 3 times the industry standard
• Meets Flame Resistance Acceptance Designation MSHA 2G
• Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms in very low temperature environments
• M4KL has tighter minimum bend radius than SAE 100R19 with 4000 PSI constant working pressure for all ID's
• 70% of EN 857 2SC and 50% of EN 853 2SN bend radius at rated working pressure
• Alternative to spiral hoses in high pressure lines where flexibility is required
• Resistant to cover cracking at low temperature and tight bend radius
• Validated with MegaCrimp™
• Working pressure: 28 MPa
• Cover: MSHA approved
Temperature Range:
• -57°C to +100°C
• -70°F to +212°F
• Design factor: 4:1
• Size: 1/4" to 3/4"
Technical Specifications
| Item#: | 1645201 |
|---|---|
| Manufacturer Model #: | 16M4KL XREEL |
| Industrial / Hydraulic | Hydraulic |
| Type | Rubber - Fabric Braid |
| Category / Performance | Medium Pressure |
| Industry Rating 1 | 100R19 |
| Manufacturer Series Number | 16M4KL |
| Manufacturer Series Name | G2H |
| I.D. | 1-1/2 (-16) " |
| Hose I.D. | 1-1/2 " |
| Hose O.D. | 2.11 " |
| Working Pressure | 4,000 PSI |
| Burst Pressure | 16,000 PSI |
| Bend Radius | 6 " |
| Inner Tube Material | Nitrile |
| Hose Reinforcement | 2-braid, wire |
| Hose Cover Material | Polychloroprene (Neoprene) - Type A |
| Minimum Temperature | -70 °F |
| Maximum Temperature | 212 °F |
| Color | Black |
| Length | 165 ft |
| Dash Size | 16 |
| UNSPSC #: | 40142020 |
| TAA Compliant: | No |
