777 Austenitic High Impact Hard Facing Stick Rod Electrode, 43 to 47 (WH) HRC Hardness, 90 to 125 Amps, AC/DCRP Polarity, 1/8"
(Pack of 5)

SKU:CW1063 Item#: CW1063

Cronatron®

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI
Hardness: Rc 47
Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).

Check Availability

Quantity

Catalog page#: 13-21

Frequently Bought Together

711 Carbide Hard Facing Stick Rod Electrode 3/16"

173 Multi Purpose High Deposition Alloy For Joining And Build Up 3/16

Item#: EG17320000

7350 Carbide Hard Facing Stick Rod Electrode 1/2"

194 High Impact Manganese Steel Alloy 3/32

Item#: EG19450000

173 Multi Purpose High Deposition Alloy For Joining And Build Up 5/32

Item#: EG17330000

194 High Impact Manganese Steel Alloy 3/16

Item#: EG19420000

SAE J995C Locknut with Nylon Insert Grade 8 5/8-11

Interchangeable Hex Bit Set 20Pc Torx

Item#: DY89310522

SAE Flat Washer Thru-Hardened Steel 1/2"

Oxy-Therm Cutting Rod 1/4 x 24"

510 Aluminum MIG Welding Wire 0.035"

45 Silver Bare Brazing Rod 1/8"

Product Description

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI
Hardness: Rc 47
Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).

Technical Specifications

Item#:	CW1063
Welding Process	Stick
Type	Stick Electrode
Diameter	1/8 "
Base Metal	Austenitic
Hardness	43-47 (WH) HRC
Polarity	AC/DCRP
UNSPSC #:	23271810
TAA Compliant:	Yes
Weight:	5.0 lb

Product Restrictions

Suggested Products

176 Extreme Abrasion With Impact 1/4X18IN

Item#: EG17610250

750 Martensitic Hard Facing Stick Electrode 1/8"

7770 Hard Facing Buildup Stick Rod Electrode 3/16"

7770 Hard Facing Buildup Stick Rod Electrode 1/8"

H3 Martensitic Hard Facing MIG Welding Wire 0.045"

7770 Hard Facing Buildup Stick Rod Electrode 1/4"

706 Hard Facing Buildup MIG Welding Wire 0.045"

676 Flux Core Wire Extreme Abrasion Moderate Impact .045X33LBS

Item#: EG67680045

711 Carbide Hard Facing Stick Rod Electrode 5/32"

747 Cobalt Stick Rod Electrode 1/8"

7310 Carbide Hard Facing MIG Welding Wire 0.045"

750 Martensitic Hard Facing Stick Electrode 5/32"

Your Recently Viewed Items