Hollow Wall Screw Anchor Steel Long Style #6-32
(Pack of
100.0)
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-34
Frequently Bought Together
Wedge Type Stud Bolt Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 4"
Couldn't load pickup availability
Masonry Anchor Star Head Steel 1/4 x 2-1/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 3/8-16
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/4"
Couldn't load pickup availability
SnapSkru® Standard Self-Drilling Wall Anchor Nylon
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25171 |
|---|---|
| Length | 2-1/16 " |
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Long |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Anchor Size | 1/8 x 2-1/16 " |
| Minimum Wall Thickness | 5/8 " |
| Maximum Wall Thickness | 1 " |
| Screw Length | 2 " |
| Wall Thickness | 5/8 to 1-1/4 " |
| Sleeve Length | 27/32 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 1.91 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
