261 Low Working Temperature Silver Cadium Free Alloy Tensile 60000 32% Elongation 19% Iacs High Silver Content High Detergent Flux
(Pack of
6)
SKU:EG26170000 Item#: EG26170000
A low working temperature silver brazing alloy with superb wetting action on difficult-to-join metals such as tool steels, stainless steel, beryllium copper and nickel alloys.
• Fast Flowing – Works well on tight joints
• High Silver Content – Lower melting point and reduces need for high heat for joining
• High-detergent conductivity
• High strength
• Corrosion resistant
• Cadmium-free
• Joint Strength: Up to 60,000 PSI/414 Mpa
• Elongation: 32%
• Working Temperature: 1370°F/743°C
• Electrical Conductivity: 19% IACS
• Corrosion Resistance: Good
• Coating: Blue
PROCEDURES Clean the weld area. Remove all rust, paint, grease, oil and other foreign matter. Maintain joint clearance of 0.003” to 0.005”. Prefluxing is not required; however, additional flux will help in tight joints and may be needed. Heat the weld area to a dull red color using a slightly carburizing flame. Melt off a small amount of alloy and flux. Keep the torch in motion and flow the deposit through the joint. Allow to cool slowly. Remove flux residue with warm water.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
52 Silver Flux Coated Brazing Rod 1/16"
Couldn't load pickup availability
52 Aluminum/Zinc Bare Brazing Rod 1/8"
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/16"
Couldn't load pickup availability
SAE Interchangeable Nut Driver Set 11Pc
Couldn't load pickup availability
Ratcheting Dual Driver
Couldn't load pickup availability
Anti-Rattle/Squeak BRS Tape 8 x 10"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
265 Bare Silver Free Flowing Copper Alloy .050X20
Couldn't load pickup availability
264 Bare High Silver Cadium Free Alloy 1/16x18
Couldn't load pickup availability
51 High Silver Flux Coated Brazing Rod 1/16"
Couldn't load pickup availability
Round Soapstone 1/4 x 5"
Couldn't load pickup availability
201 Rectangular Wear Disc Plate 3 x 6 x 5/32"
Couldn't load pickup availability
331 Mild and Carbon Steel MIG Welding Wire 0.03"
Couldn't load pickup availability
Product Description
A low working temperature silver brazing alloy with superb wetting action on difficult-to-join metals such as tool steels, stainless steel, beryllium copper and nickel alloys.• Fast Flowing – Works well on tight joints
• High Silver Content – Lower melting point and reduces need for high heat for joining
• High-detergent conductivity
• High strength
• Corrosion resistant
• Cadmium-free
• Joint Strength: Up to 60,000 PSI/414 Mpa
• Elongation: 32%
• Working Temperature: 1370°F/743°C
• Electrical Conductivity: 19% IACS
• Corrosion Resistance: Good
• Coating: Blue
PROCEDURES Clean the weld area. Remove all rust, paint, grease, oil and other foreign matter. Maintain joint clearance of 0.003” to 0.005”. Prefluxing is not required; however, additional flux will help in tight joints and may be needed. Heat the weld area to a dull red color using a slightly carburizing flame. Melt off a small amount of alloy and flux. Keep the torch in motion and flow the deposit through the joint. Allow to cool slowly. Remove flux residue with warm water.
Technical Specifications
| Item#: | EG26170000 |
|---|---|
| Welding Process | Brazing |
| Type | Flux-Coated Brazing Rod |
| Diameter | 1/16 " |
| Length | 18 " |
| Tensile Strength | 70,000 PSI |
| Melting Temperature | 1,295 °F |
| Color | Blue |
| Base Metal | All Metals Except White Metals |
| Recommended Flux | 361 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 0.395 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
