54 Aluminum Flux Cored Brazing Rod 1/8"
(Pack of
2.0)
A selection of alloys for joining all types of aluminum.
Superior Advantages
• Products for joining and buildup
• Easy to apply
Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSIApplication Temperature: 1,110°F (599°C)Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 13-29
Frequently Bought Together
53 Pot Metal Bare Brazing Rod 1/16"
Couldn't load pickup availability
53 Pot Metal Bare Brazing Rod 1/8"
Couldn't load pickup availability
22 Cast Iron Bare Brazing Rod 3/16"
Couldn't load pickup availability
30 Copper and Steel Flux Coated Brazing Rod 3/32"
Couldn't load pickup availability
202Xl Red Flux Coated Brazing Alloy 3/16
Couldn't load pickup availability
Lock Washer Alloy Steel 3/8"
Couldn't load pickup availability
Qwik Stik® Electrolyte Powder Mix 0 Cal Fruit Punch
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
TIG Welding Tungsten Electrode 2% Ceriated 3/32"
Couldn't load pickup availability
665 Copper and Brass TIG Wire 3/32"
Couldn't load pickup availability
Medium Duty Oxy Acetylene Fuel Gas Cutting Tip #2
Couldn't load pickup availability
Product Description
A selection of alloys for joining all types of aluminum.Superior Advantages
• Products for joining and buildup
• Easy to apply
Flux-cored for all types of aluminum
Tensile Strength: 34,500 PSIApplication Temperature: 1,110°F (599°C)Recommended Flux: F56 (if needed)
Typical Applications
• Aluminum frames
• Tubing and piping
• Ornamental aluminum
• Cast aluminum
Usage ProcedureBevel heavy sections to allow 100% weld metal penetration. Broadly heat area to be brazed with a large, soft and slightly carburizing flame to about 1,050°F (566°C). Warm the end of the rod and rub on base metal until flux flows freely. 54C will then begin to wet the base metal. Deposit the 54C to fill the joint. Flux residue may be removed with warm water and brush. If additional flux is needed, use F56 flux.
Technical Specifications
| Item#: | CW1857 |
|---|---|
| Welding Process | Brazing |
| Type | Flux Cored |
| Diameter | 1/8 " |
| Length | 32 " |
| Tensile Strength | 34,500 PSI |
| Melting Temperature | 1560-2000 °F |
| Base Metal | Aluminum |
| Recommended Flux | F56 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 2.5 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
